UPS (NUT)

Plugin: go.d.plugin Module: upsd

Overview

This collector monitors Uninterruptible Power Supplies by polling the UPS daemon using the NUT network protocol.

This collector is supported on all platforms.

This collector supports collecting metrics from multiple instances of this integration, including remote instances.

Default Behavior

Auto-Detection

This integration doesn't support auto-detection.

Limits

The default configuration for this integration does not impose any limits on data collection.

Performance Impact

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Metrics

Metrics grouped by scope.

The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.

Per ups

These metrics refer to the UPS unit.

Labels:

Label	Description
ups_name	UPS name.
battery_type	Battery type (chemistry). "battery.type" variable value.
device_model	Device model. "device.mode" variable value.
device_serial	Device serial number. "device.serial" variable value.
device_manufacturer	Device manufacturer. "device.mfr" variable value.
device_type	Device type (ups, pdu, scd, psu, ats). "device.type" variable value.

Metrics:

Metric	Dimensions	Unit
upsd.ups_load	load	percentage
upsd.ups_load_usage	load_usage	Watts
upsd.ups_status	on_line, on_battery, low_battery, high_battery, replace_battery, charging, discharging, bypass, calibration, offline, overloaded, trim_input_voltage, boost_input_voltage, forced_shutdown, other	status
upsd.ups_temperature	temperature	Celsius
upsd.ups_battery_charge	charge	percentage
upsd.ups_battery_estimated_runtime	runtime	seconds
upsd.ups_battery_voltage	voltage	Volts
upsd.ups_battery_voltage_nominal	nominal_voltage	Volts
upsd.ups_input_voltage	voltage	Volts
upsd.ups_input_voltage_nominal	nominal_voltage	Volts
upsd.ups_input_current	current	Ampere
upsd.ups_input_current_nominal	nominal_current	Ampere
upsd.ups_input_frequency	frequency	Hz
upsd.ups_input_frequency_nominal	nominal_frequency	Hz
upsd.ups_output_voltage	voltage	Volts
upsd.ups_output_voltage_nominal	nominal_voltage	Volts
upsd.ups_output_current	current	Ampere
upsd.ups_output_current_nominal	nominal_current	Ampere
upsd.ups_output_frequency	frequency	Hz
upsd.ups_output_frequency_nominal	nominal_frequency	Hz

Alerts

The following alerts are available:

Alert name	On metric	Description
upsd_10min_ups_load	upsd.ups_load	UPS ${label:ups_name} average load over the last 10 minutes
upsd_ups_battery_charge	upsd.ups_battery_charge	UPS ${label:ups_name} average battery charge over the last minute
upsd_ups_last_collected_secs	upsd.ups_load	UPS ${label:ups_name} number of seconds since the last successful data collection

Setup

Prerequisites

No action required.

Configuration

File

The configuration file name for this integration is go.d/upsd.conf.

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config go.d/upsd.conf

Options

The following options can be defined globally: update_every, autodetection_retry.

Config options

Name	Description	Default	Required
update_every	Data collection frequency.	1	no
autodetection_retry	Recheck interval in seconds. Zero means no recheck will be scheduled.	0	no
address	UPS daemon address in IP:PORT format.	127.0.0.1:3493	yes
timeout	Connection/read/write timeout in seconds. The timeout includes name resolution, if required.	2	no

Examples

Basic

A basic example configuration.

Config

jobs:
  - name: local
    address: 127.0.0.1:3493

Multi-instance

Note: When you define multiple jobs, their names must be unique.

Collecting metrics from local and remote instances.

Config

jobs:
  - name: local
    address: 127.0.0.1:3493

  - name: remote
    address: 203.0.113.0:3493

Troubleshooting

Debug Mode

To troubleshoot issues with the upsd collector, run the go.d.plugin with the debug option enabled. The output should give you clues as to why the collector isn't working.

• Navigate to the plugins.d directory, usually at /usr/libexec/netdata/plugins.d/. If that's not the case on your system, open netdata.conf and look for the plugins setting under [directories].

  cd /usr/libexec/netdata/plugins.d/

• Switch to the netdata user.

  sudo -u netdata -s

• Run the go.d.plugin to debug the collector:

  ./go.d.plugin -d -m upsd